Connecting a digital audio system, Connecting an amplifier/dvd home theater – Samsung FPT5894WX-XAA User Manual

Page 17

Advertising
background image

English - 17

Connecting an Amplifier/DVD Home Theater

1 Connect Audio Cables

between the AUDIO OUT

[R-AUDIO-L] jacks on the

Wireless Home AV Center

and AUDIO IN [L-AUDIO-R]

jacks on the Amplifier/DVD

Home Theater.

When an audio amplifier is

connected to the “AUDIO

OUT [R-AUDIO-L]” jacks:

Decrease the gain (volume)

of the Wireless Home

AV Center, and adjust

the volume level with the

Amplifier’s volume control.

Each Amplifier/DVD Home Theater has a different back panel configuration.

When connecting an Amplifier/DVD Home Theater, match the color of the

connection terminal to the cable.

Connect the audio from an external device to the Wireless Home AV Center.

If you connect an external device directly to the Home Theater, a lip-sync problem

may occur.

Amplifier/DVD Home Theater

Rear Panel of Wireless Home AV Center

Audio Cable (Not supplied)

Connecting a Digital Audio System

The rear panel jacks on your Wireless Home AV Center make it easy to connect a Digital Audio System.

1 Connect an Optical Cable

between the DIGITAL AUDIO

OUT (OPTICAL) jacks on the

Wireless Home AV Center

and the Digital Audio Input

(OPTICAL) jacks on the

Digital Audio System.

When a Digital Audio System

is connected to the “DIGITAL

AUDIO OUT (OPTICAL)”

jack:

Decrease the gain (volume)

of the Wireless Home

AV Center, and adjust

the volume level with the

system’s volume control.

What is OPTICAL?

• An optical cable converts an electric signal into an optical light signal, and transmits

it through glass fibers. S/PDIF is a transmission system of digital audio in the form of

a light wave that uses a glass conductor.

5.1CH audio is possible when the Wireless Home AV Center is connected to an

external device supporting 5.1CH.

Each Digital Audio System has a different back panel configuration.

When the COMPONENT IN or HDMI IN jacks are connected, the Optical jack on

the Wireless Home AV Center outputs 2 channel audio only. If you want to hear

5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD

player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the

Wireless Home AV Center.

Digital Audio System

Rear Panel of Wireless Home AV Center

Optical Cable (Not supplied)

BN68-01094W-01Eng.indb 17

2007-10-08 ¿АИД 6:04:04

Advertising
This manual is related to the following products: