Connecting cables, Using the stand, Syncmaster 732n – Samsung LS17PEASF-XAA User Manual
Page 20
Advertising
Model
Connecting Cables
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate to the computer you are using.
Using the D-sub (Analog) connector on the video card.
- Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
[RGB IN]
Connected to a Macintosh.
- Connect the monitor to the Macintosh computer using the D-sub connection cable.
Turn on your computer and monitor. If your monitor displays an image, installation is completed.
Using the Stand
Folding the base
You can tilt the monitor upwards at an angle of 0° to18°.
SyncMaster 732N
Advertising
This manual is related to the following products: