Samsung SPH-M570ZKASPR - Manual (Page 79)

2E. Contacts 67
Co
nt
acts
6. Press DONE (left softkey).
After saving the number, your phone displays the new
entry. (See “Contacts Entry Options” on page 68.)
Adding a New Group
Groups allow you to communicate simultaneously by
sending out a broadcast text message to every
member of a current group.
1. Highlight and press > Contacts > Add
New .
2. Select New Group to create a new Group category.
3. Read the onscreen information and press START
(left softkey).
4. Add multiple entries (two or more) to your new
group by highlighting a name from the list and
pressing
. This action places a check mark
alongside the name.
5. Press CONTINUE (left softkey) and enter a name for
the new group and scroll the navigation key down.
6. Press SAVE (left softkey) to assign the selected
entries to the new group.
Saving a Phone Number
To save a number from standby mode:
1. Enter a phone number and press OPTIONS (right
softkey) > Save Contact .
2. Highlight New Entry or Existing Entry and
press .
3. Highlight a label for the entry ( Mobile , Home , Work ,
Pager , Fax , or Other ) and press .
4. Enter a name for the new entry and scroll the
navigation key down. (See “Entering Text in Portrait
Mode” on page 31 and “Entering Text in
Landscape Mode” on page 35.)
Tip: ICE – In Case of Emergency
To make it easier for emergency personnel to identify
important contacts, you can list your local emergency
contacts under “ICE” in your phone’s Contacts list. For
example, if your mother is your primary emergency
contact, list her as “ICE–Mom” in your Contacts. To list
more than one emergency contact, use “ICE1–___,”
“ICE2–___,” etc.
M570.book Page 67 Thursday, June 10, 2010 12:00 PM