Samsung BD-D5250C-ZA - Manual (Page 19)

English
19
04
Connections
Case 2 : Connecting to a TV with an Audio/Video cable - Good Quality
Using an Audio/Video cable, 1. connect the VIDEO OUT (yellow) / AUDIO OUT (red and white)
terminals on the rear of the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals of
your TV.
Turn on the 2. player and TV.
Press the input selector on your TV remote control until the “VIDEO” signal from the 3. player appears
on the TV screen.
✎
NOTE
Noise may be generated if the audio cable is placed too close to the power cable.
▪
If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages ▪ 20~21)
The number and position of the ▪ input terminals may vary depending on your TV set. Please refer to the user manual of
your TV.
!
CAUTION
Do not
▪
connect the player to your TV through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
White Red Yellow
Audio/Video cable