Setup, Wireless network – Samsung BD-D5250C-ZA User Manual

Page 32

Advertising
background image

32

English

Setup

Press the ▼ button to go to

10.

DNS Mode.

Press the ▼ button to go to the first DNS

11.

entry field. Enter the numbers as above.

Press the

12.

ENTER button to select OK.

The Network Status screen appears. The
player connects to the network after the
network connection is verified.

Wireless Network

You can setup a wireless network three ways:

Wireless (General)

Using WPS(PBC)

One Foot Connection


Wireless (General) includes both Automatic and
Manual setup procedures.

Setting Up the Wireless Network Connection
- Auto

Most wireless networks have an optional security
system that requires devices that access the
network to transmit an encrypted security code
called an Access or Security Key. The Security
Key is based on a Pass Phrase, typically a word
or a series of letters and numbers of a specified
length you were asked to enter when you set up
security for your wireless network. If you use this
method of setting up the network connection, and
have a Security Key for your wireless network, you
will have to enter the Pass Phrase during the Auto
setup process.

Press the ▲▼ buttons to select

1.

Wireless

(General).

Press the

2.

ENTER button.

When done, it displays a list of the available
networks.

On the dialog that appears, click the Local

3.

Area Connection or Wireless Network
Connection depending on your network
connection.

On the Support tab, click the Details button.

4.

The Network settings are displayed.

NOTE

Depending on your Windows version, the information

may differ.

To enter the Network settings into your player,
follow these steps:

Press the ▲▼ buttons to select

1.

Wired, and

then press the ENTER button.

Press the ◄► buttons to select

2. IP

Settings,

and then press the ENTER button.

On the Network Status screen, select Cancel,

3.

and then press Enter.

Press the

4.

ENTER button to select IP Mode.

Press the ▲▼ buttons to select

5. Manual, and

then press the ENTER button.

Press the ▼ button to go to the first entry field

6.

(IP Address).

Use the number buttons on your remote to

7.

enter numbers.

When done with each field,

8.

press the ►

button to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.

Enter the

9. IP

Address, Subnet Mask, and

Gateway values.

Press the

2.

ENTER button.

Wh

d

it di

l

li t f th

il bl

Settings

Display

Audio

Network

System

Language

Security

General

Support

P ess the ENTER b tton

ettings

spla

udio

et

two

yste

angu

ecur

ener

uppo

Network Settings

> Move " Enter ' Return

u

u

r

r

Wireless

(General)

One Foot

Connection

One Foot

WPS(PBC)

Wireless

Wired

Select a network connection type.

Set up wireless network by selecting your Wireless
Router. You may need to enter security key depending
on the setting of the Wireless Router.

Press the ENTER button to select IP Mode.

Settings

Display

Audio

Network

System

Language

Security

General

Support

ngs

e

IP Settings

> Move " Enter ' Return

IP Mode Manual

IP Address

0 . 0 . 0 . 0

Subnet Mask

0 . 0 . 0 . 0

Gateway

0 . 0 . 0 . 0

DNS Mode

Manual

DNS Server

0 . 0 . 0 . 0

OK

Advertising
This manual is related to the following products: