Samsung HLS5687WX-XAC - Manual (Page 31)

English - 31
Memorizing Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable
channels. After the available channels are memorized, use the CH
and CH buttons to scan
through the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels
(automatic).
1 Press the MENU button.
Press the œ or √ button to select
“Channel”, then press the ENTER
button.
2 Press the … or † button to select
“Antenna”, then press the ENTER
button.
Press the … or † button to select
“Air” or “Cable”, then press the
ENTER button.
3 Press the … or † button to select
“Auto Program”, then press the
ENTER button.
Continued...
Selecting the Video Signal Source
Before your television can begin memorizing the available channels,
you must specify the type of signal source that is connected to the TV
(i.e., an antenna or cable system).
Channel
Enter
Channel
Antenna
Auto Program
Channel Manager
Fine Tune
Signal Strength
LNA
Air
On
Return
Channel
Enter
Channel
Antenna
Auto Program
Channel Manager
Fine Tune
Signal Strength
LNA
On
Return
Channel
Enter
Channel
Antenna
Auto Program √
Channel Manager
Fine Tune
Signal Strength
LNA
Air
On
Return
Air
Cable
BP68-00588A-03Eng(028~055) 8/22/06 5:14 PM Page 31