Samsung LS57BPHNBG-ZA - Manual (Page 20)

English - 20
Time Features
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Time, then press the
ENTER button.
4 Select the desired option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options: Clock Set, Sleep Timer, Timer1, Timer2,
Timer3
5 When you are satisfied with your setting, press the
ENTER button.
6 Press the EXIT button to exit.

Clock Set
You can set the PDP Display clock so that the current time
is displayed when pressing the INFO button on the remote
control. You must also set the time if you wish to use the
automatic on or off timers.
− Press the ◄ or ► button to select Month, Day, Year, Hour,
or Minute.
Set these by pressing the ▲ or ▼ button.
➢ You can set the Month, Day, Year, Hour, and Minute directly by pressing the numeric buttons
on the remote control.
➢ In the event of a power interruption or the set being turned off at the supply, the settings for the
Clock will be lost.
 Sleep Timer
You can select a time period of between 30 and 180 minutes after which the PDP Display
automatically switches to standby mode.
− Select the preset time interval ( Off, 30, 60, 90, 120, 150, 180) by pressing the ▲ or ▼ button.
 Timer1 / Timer2 / Timer3
You can set the On/Off timers so that the PDP Display will switch on or off automatically at the time
you select.
☛ You must set the clock first.
− Press the ◄ or ► button to select the desired item below.
Press the ▲ or ▼ button to adjust to the setting.
On Time : Select hour, minute, and No/Yes. (To activate the On time, set to Yes.)
Off Time : Select hour, minute, and No/Yes. (To activate the Off time, set to Yes.)
Repeat : Select Once, Everyday, Mon - Fri, Mon - Sat, or Sat - Sun.
Volume : Select the desired volume level.
Source : Select the desired external device.
➢ You can set the hour, and minute directly by pressing the number buttons on the remote control.
☛ Auto Power Off
When you set the timer “On”, the PDP Display will eventually turn off if no controls are operated for 3
hours after the PDP Display was turned on by timer. This function is only available in timer “On” mode
and prevents overheating, which may occur if a PDP Display is on for too long time.
Move Enter Return
Clock Set : −− : −− 
Sleep Timer : Off 
Timer1 : Inactivated 
Timer2 : Inactivated 
Timer3 : Inactivated 
Time
Move Enter Return
Screen Burn Protection 
Language : English 
Time 
Game Mode : Off 
Blue Screen : Off 
Melody : Off 
PC 
Home Theatre PC : Off 
 More
Setup
BN68-01364A-02Eng_1009.indd 20 2007-10-09 ¿АИД 2:24:26