Samsung LS57BPHNBG-ZA - Manual (Page 14)

English - 14
Customizing the Picture Settings
Your PDP Display has several setting options that allow you to
control the picture quality.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ENTER button again to select Mode.
4 Select the required mode by pressing the ▲ or ▼ button,
then press the ENTER button.
Available modes: Dynamic, Standard, Movie
5 Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
6 When you are satisfied with your setting, press the ENTER
button.
7 Press the EXIT button to exit.

Contrast – Brightness – Sharpness – Color – Tint
➢ In AV, S-Video modes of the PAL system, you cannot use
the Tint function.
Contrast – Brightness – Color Tone : PC Mode
Press the ◄ or ► button until you reach the optimal setting.
 Color Tone: Cool2/Cool1/Normal/Warm1/Warm2
➢ When the picture mode is set to Dynamic or Standard,
Warm1 and Warm2 cannot be selected.
 Reset: Cancel/OK
Select OK. You can return to the factory default picture settings.
➢ The reset function is set for each picture mode and color tone.
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ENTER button again to select Mode.
4 Select the required mode by pressing the ▲ or ▼ button,
then press the ENTER button.
Available modes: Dynamic, Standard, Movie
➢ The settings values may vary depending on the input
source. (ex. Video, Component, PC, or HDMI)
5 Press the EXIT button to exit.
➢  Choose Dynamic for viewing the PDP Display during the
day or when there is bright light in the room.
 Choose Standard for general PDP Display viewing mode.
 Choose Movie when viewing the movie.
➢ You can select these options simply by pressing the P.MODE
button on the remote control.
Contrast 100
Move Adjust Return
Move Enter Return
Move Enter Return
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Color Tone : Cool1
Detailed Settings
 More
Picture
Cool2
Cool1
Normal
Warm1
Warm2
Mode : Dynamic 
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Color Tone : Cool1 
Detailed Settings 
 More
Picture
Move Enter Return
Mode : Dynamic 
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Color Tone : Cool1 
Detailed Settings 
 More
Picture
Move Enter Return
Mode : Dynamic 
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Color Tone : Cool1
Detailed Settings
 More
Picture
Dynamic
Standard
Movie
BN68-01364A-02Eng_1009.indd 14 2007-10-09 ¿АИД 2:24:22