Samsung SPH-M330MBASPR - Manual (Page 28)

14 2A. Phone Basics
Turning Your Phone On and Off
Turning Your Phone On
ᮣ Press and hold for two seconds.
Once your phone is on, it will look for a signal. When
your phone finds a signal, it enters standby mode – the
phone’s idle state. At this point, you are ready to begin
making and receiving calls.
If your phone is unable to find a signal after 15 minutes
of searching, a PowerSave feature is automatically
activated. When a signal is found, your phone
automatically returns to standby mode.
In PowerSave mode, your phone searches for a signal
periodically without your intervention. You can also
initiate a search for Sprint service by pressing any key
(when your phone is turned on).
Turning Your Phone Off
ᮣ Press and hold for two seconds until you see
the powering-down animation on the display
screen.
Your screen remains blank while your phone is off
(unless the battery is charging).
Bluetooth Enable – The Bluetooth technology is
active and enabled.
Bluetooth Device Connected – The Bluetooth
device is connected.
Bluetooth Headset Connected – The Bluetooth
Headset is connected and visible.
Bluetooth Hidden – The device is hidden to other
Bluetooth devices and not transmitting its
information
.
Other Icons
Tip The PowerSave feature conserves your battery
power when you are in an area where there is no
signal.
Sprint M330.book Page 14 Friday, July 31, 2009 11:35 AM