Samsung BD-D6700-ZA - Manual (Page 38)

38
English
Setup
Audio Sync
In some cases when the player is connected to a
digital TV, the audio signal may not synchronize
with the video signal. If this occurs, adjust the
audio delay time to match the video signal.
• You can set the audio delay time between 0
msec and 200 msec.
Adjust it to the optimal setting.
✎ NOTE
` The audio delay time you specify may not be exact
depending on the played content.
HDMI Audio Output
Lets you select HDMI audio signals from one or
two audio devices (AV receiver or TV etc.).
• Auto : Recommended when you want to listen
the audio from one audio device when you have
two audio devices connected on HDMI OUT 1
and 2. In this case, you may not hear the audio
from device connected HDMI OUT 1.
• Dual Output : Recommended when you want
to listen the audio from two audio devices when
you have two audio devices connected on HDMI
OUT 1 and 2. If you connect 2 AV receivers on
both HDMI OUT 1 and 2, you will have more
desired audio output from HDMI OUT 2.
Network
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you are using a wired or wireless
connection, we recommend using the Auto
procedures. If you are using a wireless connection
and your router has the capability, you can use
WPS(PBC) or One Foot Connection.
If your IP address is static, you must use the
manual set up procedure for both wired and
wireless connections.
Network Settings
To begin setting up the network connection for
your player, follow these steps:
1. In the Home menu, press the ◄► buttons to
select Settings, and then press the ENTER
button.
2. Press the ▲▼ buttons to select Network, and
then press the ENTER button.
3. Press the ▲▼ buttons to select Network
Settings, and then press the ENTER button.
4. Press the ▲▼ buttons to select Wired,
Wireless (General), WPS(PBC) or One Foot
Connection, and then press the ENTER
button.
5. If you have a wired network, go to Wired
Network below. If you have a wireless
network, go to Wireless Network on pages
39~42.
Wired Network
Setting Up a Wired Connection - Auto
1. Press the ▲▼ buttons to select Wired.
2. Press the ENTER button.
The Network Status screen appears. The
player connects to the network after the
network connection is verified.
Setting Up a Wired Connection - Manual
If you have a static IP address or the Auto Setting
does not work, you’ll need to set the Network
Settings values manually.
To view your Network Settings values on most
Windows computers, follow these steps:
Settings
Display
Audio
Network
System
Language
Security
General
Support
Network Settings
> Move " Enter ' Return
Select a network connection type.
Wired
Wireless
(General)
WPS(PBC)
One Foot
Connection
Connect to the network using LAN cable. Please make
sure that the LAN cable is connected.