Wps(pbc), One foot connection – Samsung BD-D6700-ZA User Manual

Page 41

Advertising
background image

English

29

05
Setup

To enter the Network settings into your player,

follow these steps:
1. Follow Steps 1 through 4 in the ‘Setting Up

the Wireless Network Connection - Auto’

procedure.

2. When done, press the GREEN (B) button on

your remote, or press the ▲▼◄► buttons to

move the cursor to Done, and then press the

ENTER button. The Network Status screen

appears.

3. On the Network Status screen, select Cancel,

and then press Enter.

4. Press the ◄► buttons to select IP Settings,

and then press the ENTER button.

5. Press the ENTER button to select IP Mode.
6. Press the ▲▼ buttons to select Manual, and

then press the ENTER button.

7. Press the ▼ button to go to the first entry field

(IP Address).

8. Use the number buttons to enter numbers.
9. When done with each field, press the ►

button to move successively to the next field.

You can also use the other arrow buttons to

move up, down, and back.

10. Enter the IP Address, Subnet Mask, and

Gateway values.

11. Press the ▼ to go to DNS Mode.
12. Press the ▼ button to go to the first DNS

entry field. Enter the numbers as above.

13. Press the OK button.
14. The Network Status screen appears. The

player connects to the network after the

network connection is verified.

WPS(PBC)

The easiest way to set up the wireless network

connection is using the WPS(PBC) function or the

One Foot Connection function.

If your wireless router has a WPS(PBC) button,

follow these steps:
1. Press the ▲▼ buttons to select WPS(PBC).

2. Press the ENTER button.
3. Press the WPS(PBC) button on your router

within two minutes. Your player automatically

acquires all the network settings values it

needs and connects to your network.

4. The Network Status screen appears. The

player connects to the network after the

network connection is verified.

One Foot Connection

You can set up the wireless connection

automatically if you have a Samsung Wireless

Router which supports One Foot Connection. To

connect using the One Foot Connection function,

follow these steps:
1. Press the ▲▼ buttons to select One Foot

Connection.

Settings

Display
Audio

Network

System
Language
Security
General
Support

Network Settings

>

Move " Enter ' Return

One Foot

Connection

Wireless

(General)

Wired

Select a network connection type.

Connect to the Wireless Router easily by pressing the

WPS(PBC) button. Choose this if your Wireless Router

supports Push Button Configuration(PBC).

WPS(PBC)

Settings

Display
Audio

Network

System
Language
Security
General
Support

Network Settings

>

Move " Enter ' Return

Wireless

(General)

Wired

Select a network connection type.

Connect to wireless network automatically if your

Wireless Router supports One Foot Connection. Select

this connection type after placing the Wireless Router

within 10 inches(25cm) of product.

One Foot

Connection

WPS(PBC)

Settings

Display
Audio

Network

System
Language
Security
General
Support

IP Settings

>

Move " Enter ' Return

IP Mode

Manual

IP Address

0 . 0 . 0 . 0

Subnet Mask

0 . 0 . 0 . 0

Gateway

0 . 0 . 0 . 0

DNS Mode

Manual

DNS Server

0 . 0 . 0 . 0

OK

Advertising