Connecting to a power source – Samsung NV10 User Manual

Page 13

Advertising
background image

ŝ12Ş

Connecting to a Power Source

ƈ Charging LED of the AC Adapter

Charging LED

Being Charged

Red LED is on

Charging is complete

Green LED is on

Charging error

Red LED is off or blinking

ƃ Before inserting any cables or AC adapter, check the directions and do not

insert by force. It may cause breakage of cable or camera.

ƃ If the charging LED of the AC Charger does not turn on or blink after

inserting the rechargeable battery, please check whether the battery is
inserted correctly.

ƃ If you charge the battery with the camera power on, the battery can't charge

fully. Turn the camera off while charging the battery.

ƃ If you insert the fully discharged battery to charge it, do not turn on the

camera at the same time. The camera may not be turned on because of the
low battery capacity. Charge the battery for more than 10 minutes before
using the camera.

ƃ Do not use the flash frequently or take a movie clip with a fully discharged

battery that has only been charged for a short time.

CAUTION

ƈ You can charge the rechargeable battery (SLB-0837B) by using the cradle.

When you charge the battery with the cradle, you only can use Lithium Ion
battery pack (SLB-0837B).

ƈ How to charge the rechargeable battery (SLB-0837B)

ƃ Charging with the cradle

ƃ Charging with the camera

Charging LED

Being discharged

(Using the AC adapter)

Orange coloured LED is on

Advertising