Samsung HCR4245WX-XAA - Manual (Page 11)

English - 11
Y
O U R
N
E W
T V
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player. For more information on connecting
equipment, see pages 14~22.
ΠANTENNA terminals
Two independent cables or antennas can be
connected to these terminals. Use “ANT 1 IN
(Air)” and “ANT 2 IN (Cable)” terminals to
receive a signal from VHF/UHF antennas or your
cable system.
´ DVI Video Input jack
(Digital Visual Interface)
Connect the DVI jack to a device with DVI
output.
ˇ Anynet
Please refer to the Anynet Owner’s Instructions.
¨ OPTICAL Output jack
Connect to a Digital Audio component.
ˆ COAXIAL Output jack
Connect to a Digital Audio component.
Ø Audio/Video Output jacks
Connect to the audio/video input jacks of a
recording VCR.
∏ Video Input jacks
Connect to the video output jacks of VCRs, DVD
players and similar devices.
” Audio Input jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
’ DVI Audio Input jacks
Connect to the audio output jacks of a device
with DVI.
˝ COMPONENT Input jacks
(Y, P B , P R , AUDIO-L/R)
Connect to the Component audio and video
outputs of DVD or DTV Set-Top Box.
480i/480p/720p/1080i Y, P
B and P R video signal
inputs are available.
BP68-00334B-00Eng 2005/02/15 04:38 PM Page 11