Samsung HCR4245WX-XAA - Manual (Page 24)

English - 24
C h a p t e r T h r e e
O P E R AT I O N
Turning the TV On and Off
Press the POWER button.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed
automatically and subsequently: Setting the language, Antenna input
check, Channel Memorize and Time Setting.
Note : The Plug & Play function operates after plugging in the TV
for the first time.
1
Press the POWER button
on the remote control.
The message “Menu
language, channels and
Time will be set.” is
displayed.
Press the ENTER button,
then “Select the language
of the OSD” is
automatically displayed.
2
Press the ENTER button to
enter the language.
Press the … or † button
to select language, then
the ENTER button.
“Select the antennas to
memorize.” is
automatically displayed.
3
Press the … or † button
to memorize the channels
of the selected
connection.
Press the
ENTER button to
select “Start”.
When selecting Cable TV :
Press the … or † button
to select “Cable”, then
press the
ENTER button.
Press the … or † button
to select “STD”, “HRC”,
or “IRC”, then press the
ENTER button.
continued...
Select the antennas to memorize.
Air
Cable
Air + Cable
Start
Start
Start
Select the cable system.
STD
HRC
IRC
Select the language of the OSD.
Menu Language : English
Spanish
French
Menu language, channels
and Time will be set.
Start
Plug & Play
Plug & Play
Plug & Play
œ Plug & Play feature doesn’t
work when in the AV mode.
Selects English as the menu language.
Selects Air to execute the Auto Prgram
function.
Selects the STD as a signal type for your location.
BP68-00334B-00Eng 2005/02/15 04:38 PM Page 24