Samsung LS24KIQKFV-XAA - Manual (Page 22)

• Samsung is not liable for product damage or personal injury when a non-
VESA or non-specified wall mount is used or the consumer fails to follow
the product installation instructions.
• To mount the monitor on a wall, you should purchase the wall mounting
kit that allows you to mount the monitor at least 10 cm away from the wall
surface.
• Contact the nearest Samsung Service Center for more information. Sam-
sung Electronics will not be responsible for damages caused by using a
base other than those specified.
• Please use Wall Mount according to the International standards.
Connecting Cables
Connect the power cord for your monitor to the POWER IN port on the
back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
• Connect the signal cable to the 15-pin, D-sub port on the back of your
monitor.
[RGB IN]
Using the DVI (Digital) connector on the video card.
• Connect the DVI Cable to the DVI IN(HDCP) Port on the back of your
Monitor.
[DVI IN(HDCP)]
Connected to a Macintosh.
• Connect the monitor to the Macintosh computer using the D-sub con-
nection cable.
Connect the AUDIO IN terminal of the monitor and the speaker output
terminal of your computer's sound card using a stereo cable (sold sepa-
rately).
Connections