Samsung DVD-VR300-AXAX - Manual

Step Getting Connected
Step Setup
Step Basic Operation
Quick Setup Guide
Step
Step Getting Connected
Select one of the following three types of connections:
Antenna + DVD Recorder-VCR + TV : No Cable Box
Antenna + Set-Top Box + DVD Recorder-VCR + TV : No Cable Box
Antenna + Cable Box + DVD Recorder-VCR + TV
Antenna + DVD Recorder-VCR + TV : No Cable Box
OUT
RF
(TO TV)
DIGITAL AUDIO OUT
AUDIO OUT
COMPONENT
VIDEO OUT
OPTICAL COAXIAL
R Y
C B /P B
C R /P R
L
R
AUDIO AUDIO
LINE OUT LINE IN 1
VIDEO VIDEO
L
R
L
IN
(FROM ANT.)
OUT
RF
(TO TV)
R
L
R
L
TV
DVD Recorder-VCR
Connect the signal source to the DVD
Recorder-VCR
Use an antenna cable to connect the signal source com-
ing from the antenna or wall to the VHF/UHF RF-IN jack
on the DVD Recorder-VCR.
Connect the DVD Recorder-VCR to the TV
Use the supplied RF cable to connect RF-OUT on the
DVD Recorder-VCR to the ANT jack on the TV. Then use
the Video/Audio Cable to connect ANALOG AUDIO
OUT(R/L)/VIDEO OUT jacks on the DVD Recorder-VCR to
the Audio & Video jacks on the TV.
● If your TV has an S-Video jack, you can use S-Video
cable instead of the yellow video connector on the
Video/Audio cable.
● If your TV has Component video jacks, you can use
component cables instead of the yellow video con-
nector on the Video/Audio cable. Press the
Progressive out button on the front of your DVD
Recorder-VCR to 480p/480i video output mode. If
your TV supports progressive scan, select 480p.
If you have an AV amplifier
Connect either audio cables from the ANALOG AUDIO
OUT jacks on the DVD Recorder-VCR to the LINE IN jacks
on your AV amplifier, or a digital cable from the DIGITAL
AUDIO OUT (COAXIAL or OPTICAL) jack on the DVD
Recorder-VCR to the DIGITAL AUDIO IN jack on your AV
amplifier.
1
The Recorder will only record on
DVD-R, DVD-RW and DVD-RAM discs.
C Samsung Electronics Printed in Korea