Using the intelli-studio program – Samsung HMX-H300BN-XAA User Manual

Page 99

Advertising
background image

94

95

94

95

Using with a Windows computer

USING THE Intelli-studio PROGRAM

Intelli-studio is a built-in program that allows you to play back and

edit files. You can upload files to web sites, such as YouTube

or Flickr. For details, select “Help”  “Help” on the Intelli-studio

screen.

Step 1. Connecting the USB cable

1

Set “USB Connect: Mass

Storage” and “PC Software:

On”.

These are the default settings.

2

Connect the camcorder to a PC

with the USB cable.

A new file saving window

appears along with the Intelli-

studio main window. If your

camcorder has no new files,

the pop-up window for saving

new files will not appear.

Depending on your version of Windows, the Windows

removable disk window may also appear.

To disconnect the USB cable

To disconnect the USB cable after completing the file transfer, you

must follow these steps:

1. Click the “Safely Remove Hardware” icon on the taskbar.
2. Select “USB Mass Storage Device”, and then click “Stop”.
3. If the “Stop a Hardware device” window appears, click “OK”.
4. Disconnect the USB cable from the camcorder and PC.

Use the provided USB cable. (Supplied by Samsung)

Make sure you insert the USB plug into the USB jack with the plug

facing in the correct direction.

Use the AC power adaptor to power the camcorder when

transferring fi les to your computer.

When the USB cable is connected, turning the camcorder on or off

may cause the PC to malfunction.

If you disconnect the USB cable from the PC or the camcorder while

transferring fi les, the data transmission will stop and the data may

be damaged.

If you connect the camcorder to a PC via a USB HUB or

simultaneously connect the camcorder along with other USB

devices, the camcorder may not work properly. If this occurs,

remove all USB devices from the PC, and then reconnect the

camcorder.

Intelli-studio may not automatically run. If this occurs, access My

Computer or Windows Explorer, open the drive that corresponds to

your camcorder, fi nd Intelli-studio, and then run iStudio.exe.

Off

On

PC Software

1/1

Advertising
This manual is related to the following products: