2 before requesting service, Before requesting service -2 – Samsung LS23MUQHB-ZA User Manual

Page 34

Advertising
background image

5-2

Troubleshooting

5-2

Before Requesting Service

Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest
Samsung Electronics Service Center.

A BLANK SCREEN APPEARS / I CANNOT TURN THE PRODUCT ON

Is the power cord connected properly?

Check the connection status of the power cord.

Is the

“Check Signal Cable” message displayed on the screen? Check the cable connecting the PC and the product.

If the message keeps appearing even though the cable connection

is correct, press [

SOURCE] on the multi control pad and check

the input signal again.

Is the

“Not Optimum Mode” message displayed on the screen? This occurs when the signal from the graphics card exceeds the

maximum resolution or the maximum frequency of the product.

In this case, set up the appropriate resolution and the frequency for
the product.

Is a blank screen displayed and does the power LED blink at a 1
second interval?

This occurs when the power saving function is running.

If you click the mouse or press any key, the screen will be turned
on.

Did you connect with a DVI cable?

If you connect the DVI cable when the PC has booted up or if you
reconnect the DVI cable after disconnecting the cable while using
a PC, the screen may not be displayed because some graphics
cards do not output the video signal.

In this case, reboot the PC while the DVI cable is connected.

THE IMAGE IS TOO LIGHT OR TOO DARK.

Adjust the Brightness and Contrast.

(Refer to the <Brightness>, <Contrast>)

If <MagicBright> is set to <Dynamic Contrast>, the display brightness can differ according to the input signal.

THE ON SCREEN ADJUSTMENT MENU (OSD) DOES NOT APPEAR.

Did you cancel the screen adjustment?

Check if the OSD Adjustment Lock function is set to Off.

THE COLOR IS WEIRD / THE PICTURE IS DISPLAYED IN BLACK AND WHITE.

Is the entire screen displayed in the same color as if viewing the
screen through a cellophane paper?

Check the cable connection to the computer.

Reinsert the graphics card into the computer completely.

Check if the <Color Effect> is set to <Off>.

Is the graphics card configured correctly?

Set up the graphics card referring to the user manual.

THE DISPLAY AREA SUDDENLY MOVES TO AN EDGE OR TO THE CENTER.

Did you change the graphics card or the driver?

Please press the [AUTO] button to run the auto adjustment
function.

Did you change the resolution and frequency appropriate to the
product?

Set the resolution and the frequency to the appropriate values in
the graphics card

refer to the (Standard Signal Mode Table)

Is the graphics card configured correctly?

Set up the graphics card referring to the user manual.

THE PICTURES ARE OUT-OF-FOCUS.

Did you change the resolution and the frequency appropriate to the
product?

Set the resolution and the frequency to the appropriate values in
the graphics card

refer to the (Standard Signal Mode Table)

Advertising
This manual is related to the following products: