Samsung LS24BRBAB-XAA - Manual (Page 74)

15pin-to-15pin D-sub cable, detachable, 1.8 m
DVI-D to DVI-D connector, detachable, 2.0 m
Power Consumption
Less than 100 W(Analog/Digital)
Dimensions (WxDxH)/ Weight : Stand type A
560.4 x 247.1 x 443.5 mm (22.1 x 9.7 x 17.5 inch) / 9.45 kg (state of stand installed)
Dimensions (WxDxH)/ Weight : Stand type B
560.4 x 255 x 506 mm (22.1 x 10.0 x 19.9 inch) / 9.55 kg(state of stand installed)
VESA Mounting Interface
100 mm x 100 mm (for use with Specialty(Arm) Mounting hardware.)
Environmental considerations
Operating Temperature: 32°F ~ 122°F (10°C ~ 50°C)
Humidity: 10% ~ 90%, non-condensing
Storage Temperature: -4°F ~ 149°F (-20°C ~ 65°C)
Humidity: 5% ~ 90%, non-condensing
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and
computer systems will provide the best operating conditions and monitor settings. In most cases,
monitor installation will proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm
(one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE
color seem to be bright sometimes or some of black pixels could be seen. This is not from bad
quality and you can use it without uneasiness.
z
For example, the number of TFT LCD sub pixels that is contained in this product are 6,912,000
Note: Design and specifications are subject to change without prior notice.
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor into a low-power mode when it has not been used for a certain amount of
time. The monitor automatically returns to normal operation when you press a key on the keyboard. For
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in
your computer. Use a software utility installed on your computer to set up this feature.
State Normal Operation Power saving mode
Power off
(Power S/W off )
Power indicator Green Green, Blinking Black
Power Consumption
Analog/Digital
Less than 100 W
Analog/Digital
Less than 2 W
(Off-mode)
Less than 0 W