Samsung SEC-R311ZGAUSC - Manual (Page 122)

119
5. Press PAIR ( ) to pair the selected device with the
phone. You are prompted to enter the passkey or PIN for
the selected device. (For more information, refer to the
device user manual.)
Note: If you are pairing with another handset, both devices prompt you to
enter a PIN. To pair the two handsets, enter the same PIN on both
devices.
6. Enter the device passkey or PIN and press . The
Bluetooth function pairs with the selected device, then
prompts you to confirm that you want to connect with the
device now.
• To connect with the device now, press the Yes soft key.
• To connect with the device at a later time, press the No soft key.
Registered List
Registered List provides a list of Bluetooth
wireless technology devices previously
connected to your handset.
ᮣ In standby mode, press Menu ( ),
then select Bluetooth ➔ Registered
List. The Bluetooth screen appears in
the display showing a list of devices
previously connected to your device.
Connecting to a Bluetooth Device
From the Registered List,
ᮣ Select the desired device.
Note: If you are unable to pair with the device a pop-up appears in the
display. To retry, press the Yes soft key.
Bluetooth Settings
1. In standby mode, press Menu ( ), then select Bluetooth
➔ Bluetooth Settings. The following options appear in the
display:
• Enable / Disable — Turns Bluetooth on or off.
• Discovery Mode — Lets other devices “see” (access) your device.
Select On for other devices to see your device, or Off for no visibility.
• Device Name — Shows the handset name. You may change this
name. Enter text changes and press to save them.
• Supported Profiles — Lists and explains the Bluetooth profiles
supported by your phone.
• Device Info — Shows the Bluetooth Type, Status, and Address of
your phone.
2. Select the desired option to perform the related process.