AGFA SNAPSCAN E42 - Manual (Page 45)

Chapter 5: Configuring Buttons on Your Macintosh Computer 45
Creating a New Configuration
It is possible to create a new configuration and assign it to one of the four buttons of your
SnapScan. The following example will show you how this is done.
In this example we will create a new configuration and assign it to the e-mail button.
1 Open the Agfa ScanWise software.
2 Select Configure Buttons from the Tools menu.
The Configure Buttons window appears.
a. e-mail button
b. print button
c. ScanWise button
d. OCR button
3 Click Organize.
The Organize Actions window appears.