Caution on lamp use and replacement, Projector lamp, Caution on lamp replacement – Samsung SPH700AEX-XAA User Manual

Page 5: Caution on lamp use, Preparation

Advertising
background image

Caution on Lamp Use and Replacement

Preparation

Caution on Lamp Use and Replacement

5

The Projector lamp changes in nature depending on time of use and
using environment. Refer to the installation and other
recommended operational sections of the user’s manual to avoid
rapid degradation of performance and deterioration of picture
quality. The projector lamp requires regular replacement.

Free servicing will be offered within 90 days after purchasing of the
product and within 300 hours of product use, if the problem is due
to a defective lamp.

You can check the lamp use time by pressing the INFO button on
the remote control.

Projector Lamp

Unplug the power cord before replacing the lamp.

Inside of the projector is very hot. Cool off the projector for at least
an hour after turning off.

Contact your dealer to purchase a lamp for replacement.
(Ultra violets from the lamp can damage your eyes.)

Turn off the power of the lamp before replacement or repair.
(Due to the high-pressure of the lamp, it is possible to explode.)

When the lamp is broken, be careful not to be hurt by glass pieces.
Refer to the manual for proper handling.

Caution on Lamp Replacement

This projector produces intense light. Do not stare light source
directly.

Do not touch the exhaust vent during operation. It can be very hot.

Do not expose the unit to rain or moisture.

Caution on Lamp Use

Advertising
This manual is related to the following products: