Samsung SPH700AEX-XAA - Manual (Page 60)

Connecting to PC
You can connect a PC to the projector and use it as a monitor.
Connecting to PC
Connecting to PC
60
Turn on the projector and press the PC button
to select PC. If the projector is connected to
DVI, press the DVI button to select DVI.
■ If PC Mode is not available, check PC video cable is
in place.
Turn on the PC and set the PC Environment
when necessary. (Page 59)
Adjust the screen. (Pages 62~65)
1
2
3
NOTE
■ Enjoy better picture quality by using DVI-D cable (supports digital signals only)
instead of PC Video cable.
■ DVI-I cable (supports analog signals) is not supported. Use DVD-D cable.
■ Sound comes out from PC speakers.
NOTE
This product supports Plug & Play. No driver installation is needed for Windows XP.
Rear side of Projector
PC
1
PC
DVI-D Video
Cable
PC Video
Cable
or
Rear Connection
Using PC Video Cable or DVI Cable
1
DVI-D Port
Viewing the PC Screen
Connect PC (RGB In) port on the rear side of the projector to the monitor output port
of PC using PC video cable.
■ If PC has a DVI output port, connect it to DVI port of the projector.