Case 2 : connecting to an audio system, Av receiver with dolby digital or dts decoder), Better quality – Samsung BD-D7500-ZA User Manual
Page 25: Case 3 : connecting to an audio system, Stereo amplifier) - good quality
English
25
04
Connections
Case 2 : Connecting to an Audio
System (AV receiver with Dolby Digital
or DTS decoder) - Better Quality
1. Using an optical cable, connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the
player to the DIGITAL AUDIO IN (OPTICAL)
terminal of your AV receiver.
2. Using the video signal cable(s), connect the
HDMI or A/V OUT terminal on the player to
the HDMI or VIDEO IN terminal of your TV.
(See pages 22~23)
3. Turn on the player, TV, and AV receiver.
4. Press the input select button of the AV receiver
to select the external input and hear sound
from the player. Refer to your AV receiver’s user
manual to set the AV receiver’s audio input.
5. Press the input selector on your TV remote control
to select the video source (HDMI or Video.)
Case 3 : Connecting to an Audio System
(Stereo Amplifier) - Good Quality
1. Using the Audio/Video cable, connect the A/
V OUT (yellow) terminal on the player to the
AUDIO IN (red and white) terminals of your
stereo using the red and white wires.
2. Using the video signal cable(s), connect the
HDMI terminal on the player to the HDMI
terminal on your TV or connect the yellow
wire from the Audio/Video cable to the AV In
terminal of your TV. (See pages 22~23)
3. Turn on the player, TV and Stereo Amplifier.
4. Press the input select button of the Stereo
Amplifier to select the external input in order
to hear sound from the player. Refer to your
Stereo Amplifier’s user manual to set the Stereo
Amplifier’s audio input.
5. Press the input selector on your TV remote control
to select the video source (HDMI or Video.)
✎
NOTE
` If you use the Digital Audio connection described in Case 2, you will hear only front two speakers with Digital Output
setting as PCM.
` To connect to your TV using the Audio/Video cable, you may need to connect an extension cable to the yellow video wire.
If you use an extension cable, the cable must have an RCA male plug on one end and an RCA female jack on the other.
White
Red
Case 2 : Optical cable
(not included)
Case 3 : Audio/
Video cable