Adjusting the height of the upper rack, Removing the upper rack – Samsung DMR78AHW-XAA User Manual

Page 15

Advertising
background image

using your dishwasher

_15

adjuStIng thE hEIght of thE uppEr rack

This Samsung dishwasher uses a rack able to accommodate larger sized plates. By adjusting the height of
the upper rack, you can make room for different size dishes. You can place dinner plates with a diameter of
14 in. (36 cm) into the lower rack and plates up to 12 in. (30 cm) in diameter into the upper rack.

dmR78 Series
1.
To lower the upper rack by 2 in. (5 cm),

press the ‘A’ levers located at the left and
right sides of the upper rack and push the
upper rack downwards slightly at the same
time.

2. To raise the upper rack, just pull the upper

rack upwards without operating any levers.
The levers will latch and the upper rack will
be in the high position.

We recommend adjusting the height of the
upper rack before loading dishes into the
rack, as the dishes may be damaged.

rEmovIng thE uppEr rack

See the illustrations below for removing the upper rack.
Pull the upper rack towards the front and then remove it by lifting it up slightly and pulling it towards the
front (as shown in figures below).
When loading dishes, we recommend pulling the upper rack sufficiently to the front and then loading it.

While the upper rack is removable, it must be installed for the dishwasher to operate properly.
If you attempt to operate the dishwasher without the rack, noise will occur and the dishwasher will
perform poorly.

02 using your dishwasher

CAUTION

CAUTION

A

DMR78-00036A(XAA).indb 15

2009-09-11 �� 7:19:09

Advertising