Samsung LE26A457C1D - Manual (Page 52)

English - 50
Recording
You can make a recording of a tV programme using a recorder.
Press the
button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
The current TV programme is recorded in the Watching TV status. If you are watching video from
another device, the video from the device is recorded.
You can also record the source streams by selecting "Record" after pressing the tOOLS button.
Before recording, check whether the antenna jack is properly connected to the recording device. For
the antenna connection to the recording device, refer to its user manual.
➣
➣
➣
Listening through a Receiver
You can listen to sound through a receiver instead of the tV speaker.
1. Press The tOOLS button. Then Press the ENtER button
to select "Anynet+(HDMI-CEC)".
Press the ▲ or ▼ button to select "Receiver", then press the
ENtER button.
. Press the ◄ or ► button to select to "On", then press the
ENtER button.
Now you can listen to sound through the receiver.
. Press the EXIt button to exit.
When the receiver is set to On, you can listen to the TV sound
through the 2-channel receiver.
If the receiver is exclusively for a home theatre only
(supporting audio only), it may not appear in the device list.
Only when you have connected the optical jack of the TV and the receiver properly, does Receiver
work.
In case of a content with copyright problem, listening through the receiver may not properly operate.
If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the
power cord or a power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again.
(see page 22)
➣
➣
➣
➣
➣
View tV
Select Device 
Record 
Menu on Device 
Device Operation 
Receiver :Off 
Setup 
tV P9
Move Enter
Return
��i.indb 50 2008-03-03 ¿АИД 4:15:40