Samsung LE40R73BD - Manual (Page 12)

English-0
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been automatically stored.
Give easily remembered numbers to the channels that you watch most often.
1. Press the menu button to display the menu. Press the 5 or 6 button
to select "Channel", then press the enter/oK button.
2. Press the 5 or 6 button to select "Sort", then press the enter/oK button.
3. Select channel number that you wish to change by pressing the
5 or 6 button repeatedly. Press the enter/oK button.
The selected channel number and name are moved to right side.
4. Press the 5 or 6 button to move to the position in which you would like to change and
then press the enter/oK button.
The selected channel is exchanged with the one previously stored to the chosen number.
5. Repeat steps 3 to 4 for another channel to be sorted.
6. Press the exit button to exit.
Sorting the Stored Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1. Use the number buttons to directly select the channel that you want to fine tune.
2. Press the menu button to display the menu.
Press the 5 or 6 button to select "Channel", then press the enter/oK button.
3. Press the 5 or 6 button to select "Fine Tune", then press the enter/oK button.
4. Press the 3 or 4 button to adjust the fine tuning.
Press the enter/oK button.
5. Press the exit button to exit.
Fine tuned channels that have been saved are marked with an asterisk "*" on the
right-hand side of the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select "Reset" by pressing the 5 or 6 button and then press the
enter/oK button.
button.
Fine tuning Channel reception
Channel names will be assigned automatically when channel information is broadcast.
These names can be changed, allowing you to assign new names.
1. Press the menu button to display the menu. Press the 5 or 6 button
to select "Channel", then press the enter/oK button.
2. Press the 5 or 6 button to select "Name", then press the enter/oK button.
3. If necessary, select the channel to be assigned to a new name by
pressing the 5 or 6 button. Press the enter/oK button.
The selection bar is displayed around the name box.
4.
The characters available are :
Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the exit button to exit.
assigning Channels names
to...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name then...
Press the 5 or 6 button
Press the 4 button
Press the 3 button
Press the
enter/oK button
BN68-01007B-00Eng.indd 10 2006-03-21 ¿АИД 4:36:24