Audiovox RMP-97-CRM User Manual

1997 full size pick-up, tahoe and suburban, Rmp-97-crm

Advertising
background image

INSTALLATION GUIDE FOR:

1997 FULL SIZE PICK-UP,

TAHOE and SUBURBAN

Printed in U.S.A.

Form No. 128-5104

PARTS LIST:

Item

1
2
3
4

RADIO INSTALLATION:

(Fig. 2)

1. Complete all radio wiring connections including attachment

of the antenna adaptor.

2. Place radio assembly into dash opening by sliding onto rails

and pushing back until plastic retainer clips lock.

3. Perform a functional test on the radio to assure proper op-

eration.

4. Re-assemble the dash.

Description

Left Radio Mounting Bracket
Right Radio Mounting Bracket
Plastic Push Pin
#8 x 3/8" Sheet Metal Screw

Qty.

1
1
2
4

DASH DISASSEMBLY:

1. With the gear selector in low, firmly pull away the trim panel

from the dash.

2. Disconnect all dash switch wiring from panel and remove

panel.

RADIO PREPARATION:

(Fig. 1)

1. Attach left bracket (Item #1) to the left side of the radio

using (1) plastic push pin (Item #3) at the rear mounting
hole and (2) screws (Item #4) at the front mounting holes.

2. Attach right bracket (Item #2) to the right side of the radio

using (1) plastic push pins (Item #3) at the top mounting
holes and (2) screws (Item #4) at the front mounting holes.

RMP-97-CRM

FIG. 1

GM-SERIESRADIO

OR

GC-SERIESRADIO

PLASTICPUSHPIN

(ITEM#3)

PLASTICPUSHPIN

(ITEM#3)

SHEETMETALSCREWS

(ITEM#4)

LEFTRADIOMOUNTING

BRACKETASSEMBLY

(ITEM#1)

RIGHTRADIOMOUNTING

BRACKETASSEMBLY

(ITEM#2)

SHEETMETALSCREWS

(ITEM#4)

Advertising