Samsung LE40C750R2W - Manual (Page 16)

16
English
Basic Features
Picture Menu
Changing the Preset Picture Mode ¦
Mode t
Select your preferred picture type.
Dynamic ■ : Suitable for a bright room.
Standard ■ : Suitable for a normal environment.
Natural ■ : Suitable for reducing eye strain.
Natural
✎
is not available in PC mode.
Movie ■ : Suitable for watching movies in a dark room.
Adjusting Picture Settings ¦
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
NOTE
✎
In analogue x TV, Ext., AV modes of the PAL system,
the Tint (G/R) function is not available.
In PC mode, you can only make changes to
x
Backlight, Contrast and Brightness.
Settings can be adjusted and stored for each
x
external device connected to the TV.
Lowering picture brightness reduces power
x
consumption.
Economical Solutions ¦
Eco Solution
Energy Saving (Off / Low / Medium / High / Picture ■
Off / Auto)
t
: This adjusts the brightness of the
TV in order to reduce power consumption. If you select
Picture Off, the screen is turned off, but the sound
remains on. Press any button except volume button to
turn on the screen.
Eco Sensor (Off / On)
■ : To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
If you adjust the
✎
Backlight, the Eco Sensor will
be set to Off.
Min Backlight: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
If
✎
Eco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
No-Signal Power Off (Off / 15 min / 30 min / 60 min) ■ :
Activates the Stand-by mode, in the case of “No Signal”
or “Check Signal Cable” status for a certain period of
time defined by the user.
Disabled when the PC is in power saving mode.
✎
Changing the Picture Options ¦
Advanced Settings
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
In PC mode, you can only make changes to
✎
Dynamic
Contrast, Gamma and White Balance.
Black Tone (Off / Dark / Darker / Darkest) ■ : Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High)
■ : Adjust
the screen contrast.
Shadow Detail (-2~+2)
■ : Increase the brightness of dark
images.
Disabled under
✎
PC mode.
Gamma ■ : Adjust the primary colour intensity.
Expert Pattern (Off / Pattern1 / Pattern2) ■ : By running
the Expert Pattern function, the picture can be
calibrated without a generator or filter. If the OSD menu
disappears or a menu other than the Picture menu is
opened, the calibration is saved and the Expert Pattern
window disappears.
While the
✎
Expert Pattern is running, sound is not
outputted.
Only enabled on DTV, Component / HDMI models.
✎
RGB Only Mode (Off / Red / Green / Blue) ■ : You can
adjust Colour or Tint (G/R) of Red, Green or Blue for
the picture from an external device (DVD player, home
theatre, etc.).
Colour Space (Auto / Native / Custom)
■ : Adjust the
range of colours available to create the image. To adjust
Colour, Red, Green, Blue and Reset, set Colour
Space to Custom.
Advanced Settings
Black Tone : Off ►
Dynamic Contrast : Medium
Shadow Detail : -2
Gamma : 0
Expert Pattern : Off
rGB Only Mode : Off
Colour Space : Native
▼
U Move E Enter R return
BN68-02808A_Eng.indb 16 2010-03-28 �� 1:00:07