Samsung LE40C750R2W - Manual (Page 40)

40
English
Advanced Features
Other Restrictions
NOTE
✎
If there are problems with the contents of a codec, the codec will not be supported. x
If the information for a Container is incorrect and the file is in error, the Container will not be able to play x
correctly.
Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec
x
listed in the table above.
Video Decoder Audio Decoder
Supports up to H.264, Level 4.1 •
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not •
supported.
XVID, MPEG4 SP, ASP:
•
Below 1280 x 720: 60 frame max –
Above 1280 x 720: 30 frame max –
GMC 2 over is not supported.
•
H.263 is not supported. •
Only Samsung Techwin MJEPG is supported. •
Supports up to WMA 7, 8, 9, STD •
WMA 9 PRO does not support 2 channel excess multi channel or •
lossless audio.
WMA sampling rate 22050Hz mono is not supported.
•
Playing recorded TV or movie file continuously (Resume Play)
If you exit the playing Recorded TV or Videos function, it can be played later from the point where it was stopped.
If you press the
✎
ENTER E button (Chaptering) during playing the file, you can explore scene divided into 5 chapters
you want.
If the index information is damaged or unsupported, you will not be able to use the
✎
Chaptering function.
1. Select the movie file you want to play continuously by pressing
the ◄ or ► button to select it from the file list section.
2. Press the � (Play) / ENTER E button.
3. Select Play Continuously (Resume Play) by pressing the Blue
button. The Movie will begin to play from where it was stopped.
The Blue button is available when resuming play.
✎
If the
✎
Cont. movie play help function is set to On in the
Settings menu, a pop-up message will appear when you
resume play a movie file.
Movie 01.avi
00:04:03 / 00:07:38 1/1
SUM B Section Repeat Play continuously E Chaptering L Jump T Tools
resumes playing from the last
viewed scene.
Play continuously
BN68-02808A_Eng.indb 40 2010-03-28 �� 1:00:14