Addonics Technologies ADCB2SA-E User Manual

Addonics technologies

Advertising

ADDONICS TECHNOLOGIES

Model: ADCB2SA-E

ADCB2SA-E Windows Driver Installation
Note:

If you are only configuring independent drives using the host controller all
you need to install is the driver.

1. Connect the CardBus host controller to an available CardBus slot.
2. Turn computer ON. When Windows boots up, the “Found New Hardware

Wizard” pops on the screen and the Silicon Image SiI 3512 SATALink
Controller is identified.

3. Place the Driver Disk on your optical drive. Select automatically look for driver

on the wizard.

4. Wait while the wizard installs the software.
5. After driver installation, it is recommended to restart your system.

Confirming Host Controller Driver Installation
1. Right click the My Computer icon and select Properties.
2. Click Device Manager in the Menu Tree.

Click the “+” sign in front of SCSI and RAID Controllers. You should see

Silicon Image SiI 3512 SATALink Controller.

TECHNICAL SUPPORT

Email:

http://www.addonics.com/sales/query/

Internet:

http://www.addonics.com

Technical Support (8:30 am to 6:00 pm PST)
Phone:

408 433-3855

Email:

http://www.addonics.com/support/query/