Movies2Go MMD11A - Manual (Page 3)

MATERIALS INCLUDED IN THIS PACKAGE:
TOOLS REQUIRED:
#2 Phillips Screwdriver
#1 Phillips Screwdriver
Utility or Razor Knife or Shears
Wire Strippers
Upholstery hook tool (for removal of panels as necessary)
Electrical Tape
Masking Tape
Multimeter (to verify 12 volt DC and continuity: Do not use a test light or logic probe)
Marker pen – to mark headliner
Scribe (to mark trim ring if used)
Misc. electrical connectors (to connect to vehicle power source). Requirements will vary
from vehicle to vehicle)
DVD Movie (to verify system operation after installation)
1
(Optional)
2
3
5 7 9
4
6 8
(Optional)
10
1) 11" TFT LCD Overhead Monitor With DVD Player – (1pc)
2) 12 Pin Power / Signal harness (P/N 112-3483) – (1pc)
3) 2 Pin Power Wire Harness with choke (P/N 112B3143) – (1pc)
4) 9 Pin ~ 3 RCA Jack Pigtail (P/N 112-3682) – (1pc)
5) Hardware Package
Screws ISO 3 x 6mm Long – (10pcs)
#8 x 3/8" Self Drilling Screws – (4pcs)
M5 Screws – (4pcs)
6) Remote Control (P/N 136-4196) – (1pc)
7) Universal Mounting Bracket (P/N 108-3930) – (1pc)
8) Trim Ring - Titanium (P/N 102-4641) – (1pc)
Optional Accessories
9) Wireless Headphones – (2pcs)
10) SIRSWB Relay Box (P/N 112C3159) – (1pc)
3