Avaya 2050 - Manual (Page 29)

2030 & 2050 Telephone User Guide Page 25
IP Office 40DHB0002UKAG Issue 7c (17th May 2004)
DSS Keys
Setting Up a DSS Key
The 2030 and 2050 phones have eight DSS keys along their right-hand edge. Each of these keys can
store an extension number (or group number for paging). They then allow you to dial those numbers in a
single key press.
You can also use DSS keys to dial your personal speed dial numbers (see Using Speed Dials ).
To set a DSS/BLF key directory number:
1. Press PROGRAM and then the DSS key to use.
2. Enter the phone's passcode (see The Phone Passcode ).
3. The display shows the current stored number (if set).
4. Press zCANCEL and dial the number to store.
5. Select another DSS key and enter the required details
6. Press zDONE then PROGRAM to finish.
Using DSS Keys
Once setup, you can use the DSS key for the following actions. You can also use DSS keys to dial
personal speed dial numbers (see
Storing Personal Speed Dials ).
To make internal calls:
1. Press the DSS key storing the extension or group number.
To pickup calls:
1. Press the DSS key storing the ringing number (this will be giving a fast red flashing for an
extension or fast green flash for a group), the call details are shown.
2. Either press SPEAKER and then ANSWER RELEASE to answer the call or just ANSWER
RELEASE to cancel the pickup attempt.
To make a page call:
1. Press zPAGE and then the DSS key storing the extension or group number. See Making a Page
Call for more information.