Avaya 2050 - Manual (Page 34)

2030 2050 User Guide
2030 & 2050 Telephone User Guide Page 30
IP Office 40DHB0002UKAG Issue 7c (17th May 2004)
Changing the Soft DSS Display Mode
The display mode sets how many Soft DSS keys you can have; 4 in half-line mode or 2 in full-line mode.
Note that if you change mode from half-line to full-line, you lose the last two extensions entered.
To set the Soft DSS key display mode:
1. Press PROGRAM and SCROLL. Press zSOFT DSS.
2. Enter the phone's passcode (see The Phone Passcode ).
3. Press zMODE. The display shows the current mode.
4. To change mode, press zCHANGE.
5. Press zDONE. The display goes to extension entry.
6. Press PROGRAM to finish.
Changing the Soft DSS Extensions
The Soft DSS features only work correctly with extension numbers. Do not set lines or groups as Soft
DSS keys.
To set a Soft DSS key extension:
1. Press PROGRAM and SCROLL. Press zSOFT DSS.
2. Enter the phone's passcode (see The Phone Passcode ).
3. Press zEXTNS. to display the first number set.
• To cancel the number, press zCANCEL.
• To display the next number, press zNEXT.
• To enter a new number, press zNEXT until the top-right display goes blank, then enter
the number.
4. Press PROGRAM to finish.