Avaya 2050 - Manual (Page 7)

The 2030 & 2050 Phone
2030 & 2050 Telephone User Guide Page 3
IP Office 40DHB0002UKAG Issue 7c (17th May 2004)
Notes for Notes for INDeX Users
This section is for 2030/2050 telephone users who were previously using their telephone on an Avaya
INDeX telephone system. The same phones can be connected to an IP Office telephone system using
an IP Office Digital Terminals (DT) expansion module or an INDeX Media Gateway.
Most of the phone features will operate in the same way. Listed below are those which have some
differences.
Redial
1. Press REDIAL to see the last number dialed, then:
• Press SCROLL or REDIAL again to see other previous dialed numbers (last 10).
• Press zCALL to redial the number shown.
• Press zDELETE to remove the number shown.
Return a Missed Call
The number (1 to 30) shown at the bottom-right of the phone display when idle is a call history which
includes missed calls.
1. Press the z display key next to the number, then:
• Press SCROLL or the z display key again to display the next stored number.
• Press zCALL to dial the number shown.
• Press zDELETE to remove the number shown.
Answer Calls Using a DSS/BLF Key
1. Press the DSS key and then press SPEAKER.
Set a Divert
Operates the same as on an INDeX system except uses zSET and zCLEAR to make the divert active
or inactive.
General Differences:
• LOG ON: As INDeX but does not disappear when logged on.
• Make a Page Call: Dial tone is heard when zPAGE is pressed.
• Hold a Call/Transfer a Call: If holding more than one call, there is an idle state between toggling
calls. Therefore press HOLD twice to toggle.
• Set Pickup Number: Only available for group numbers.
• Change Language: Not password protected.
• Soft Key Usage: The zRETRY option allows another option to be selected.
• Send Supervisor Message: Not available.
• Busy Not Available Reasons: Not available.