Changing batteries, Nomenclature/composition – Nikon Laser User Manual

Page 6

Advertising
background image

10

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

11

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

1

Monocular objective lens/

Laser emission aperture

2

Laser detector aperture

3

MODE button

4

POWER button

5

6x monocular eyepiece

6

Eyecup/dioptre adjustment ring

7

Dioptre index

8

Strap eyelet

9

Battery chamber cover

!p

Battery chamber cover “Open/Close”

indication

!q

Product number/explanatory label

!w

Laser warning label

Changing Batteries

Type of battery: 3V CR2 lithium battery

Battery condition indicators

: Battery has enough power for use.

: Battery is getting low.

flashing: Battery is low and battery should be replaced.

disappears: Battery is exhausted and should be replaced.

Flashing

mark in the LCD alerts that the battery should be replaced.

1. Open the battery chamber cover

Using the ball of the thumb or a coin in the recessed part of the battery chamber cover, rotate the cover following the Open/Close
arrow indicator. It may not open easily due to its rubber packing for water resistance.

2. Replace the old battery with a new one

Install new battery with the [+] and [-] correctly positioned following the “Battery installation” indication seal in the battery chamber.
(Insert battery positioning the [+] pole towards the inside of the chamber.) [The Nikon Laser 1000A S will not operate if the battery is

installed incorrectly.]

3. Close the battery chamber cover

Align the Open/Close indicator with the white dot and insert the battery chamber cover. Using the ball of the thumb or a coin, turn
the cover in the opposite direction to the arrow indicator. It may not close easily due to the rubber packing for water resistance, but

continue to turn it all the way until it stops. Confirm that the cover is securely closed.

Battery life

Continuous operation: Approx. 5,500 times (at 20°C)

This figure may differ according to temperature, and other factors such as target shape, colour, etc.

* The Nikon Laser 1000A S comes with a 3V CR2 lithium battery. However, due to natural electrical discharge, the life of the battery will likely be shorter than

that noted above.

* Replace battery if the Nikon Laser 1000A S is ever submerged in water or if water enters the battery chamber.

Nomenclature/Composition

Body ..............................................x1

Soft case (CDC) ...........................x1

Neckstrap ....................................x1

Lithium battery (CR2) ..............x1

Composition

!q

!p

8

9

5

6

7

1

2

3

4

!w

Advertising