Configuration, Configuring the case for the j3, Configuring the case for the s1 – Nikon WP-N2 User Manual

Page 44: Confi guration

Advertising
background image

5

En

Confi guration

Confi guration

At shipment, the case is confi gured for use with the J3. Removable parts
allow the case to be confi gured for use with the S1. Be careful not to drop
the parts during replacement.

Confi guring the Case for the J3

Confi guring the Case for the J3

The case is confi gured for use with the J3 at shipment. Do not change the
confi guration when using the case with the J3.

Confi guring the Case for the S1

Confi guring the Case for the S1

For use with the S1, confi gure the case as shown below.

Inner hood (×1)
Inner hood spacer

(×1)

*1

Power switch contact

(×1)

*2

Front cushion

(×4)

*2

Side cushion

(×2)

*2

*1 Remove when using the case with the S1.

*2 When using the case with the S1, remove, reverse, and reattach.

D

Important!

Be sure all parts are securely installed. Failure to fully insert removable parts may result in loss
or in leaks and damage to the camera. When replacing parts, choose a brightly-lit location
and be careful not to hurt your fi ngers or damage your fi ngernails.

Advertising