Nikon Forestry - Manual (Page 9)

16
Ru
Se
Nl
Dk
Pl
Hu
Cz
Fi
No
En
De
Fr
Es
It
Ro
17
Ru
Se
Nl
Dk
Pl
Hu
Cz
Fi
No
En
De
Fr
Es
It
Ro
7. Switching Target priority modes (Factory default setting is
Distant Target Priority mode.)
1. LCD panel should be on.
2. Press and hold button, then depress and hold
button within 0.5 second.
Note） If the button is not pressed within 0.5
second, the display unit (m/yd/ft) will be switched.
3. Continue to press and hold both buttons (more than 2
seconds) until First Target Priority mode and Distant Target
Priority mode are switched.
Note: If buttons are not pressed in the correct order,
switching will not take place.
Note: If switching fails to take place, repeat 2.
4. Release buttons.
Note: Because Target Priority mode is not displayed
while Angle mode is set, switching is made but
visual confirmation is impossible. Switch to another
measuring mode for confirmation.
[Deciding which Target Priority to use]
When obtaining different results from a single measuring
operation, the Nikon Laser Forestry Pro will display the distance
to the farthest target on the LCD panel when using Distant Target
Priority mode, while First Target Priority mode will show the range
to the nearest target.
ex.) When measuring a tree standing in front of a house;
"115m" (distance to the tree) will be displayed in First Target
Priority mode, and "128m" (distance to the house) in Distant
Target Priority mode. First Target Priority mode, for example, has
applications for golf, while Distant Target Priority is useful when
hunting in heavily wooded areas.
8. Low battery indication
Flashing indicates that the battery power is low and
battery should be replaced. (See "Changing Battery")
First Target Priority
[ ]
Distant Target Priority
[ ]
Tree Fence House
Distance to Target
115m 123m 128m
Specifications Operational Summary
Measuring system
Measuring mode display
Linear distance : Act
Horizontal distance : Hor
Height : Hgt
Angle : Ang
Vertical separation (height between two points ): Hgt + Hgt2
Three-point measurement : Hor + Hgt + Hgt2
Measuring distance/ angle range
Distance: 10-500 meters/11-550 yards/33-999 feet
(999 feet: 304.5 meters/333 yards)
Angle: ± 89°
Distance-
angle
Display
steps
Act
(Linear distance)
0.5m/yd., 1.0 ft. ( ＜ 100m/yd./ft.)
1.0m/yd., 1.0 ft. ( ≧ 100m/yd./ft.)
Hor
(Horizontal distance)
0.2m/yd., 0.5 ft. ( ＜ 100m/yd./ft.)
1.0m/yd., 1.0 ft. ( ≧ 100m/yd./ft.)
Hgt
(Height)
0.2m/yd., 0.5 ft. ( ＜ 100m/yd./ft.)
1.0m/yd., 1.0 ft. ( ≧ 100m/yd./ft.)
Ang (Angle) 0.1° ( ＜ 10°), 1.0°( ≧ 10°)
Linear distance
Horizontal dist.
Height
Angle
0.5m/yd., 1.0 ft.
0.2m/yd., 0.5 ft.
0.2m/yd., 0.5 ft.
0.1°
System First Target Priority/Distant Target Priority switching system
Optical system
Type
Roof-prism monocular
Magnification (x) 6
Effective diameter of objective lens
(mm)
ø21
Angular field of view (real) (˚) 6.0
Eye relief (mm) 18.2
Exit pupil (mm) ø3.5
Dioptre adjustment ±4m -1
In
ter
nal
Ex
ter
nal