Aquatic HOTSOAK 54 AI7240RHS User Manual

Hotsoak 54, Specifications, Hotsoak series

Advertising
background image

100

SPECIFICATIONS:

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

www.aquaticwhirlpools.com 800.555.5324

August 2008

Rough-In Plumbing
Measurements

HOTSOAK SERIES

Model #

ai7240RHS

HOTSOAK 54

GeneRal SPecIfIcatIonS:

Tub Size

71 3/8” x 39 1/4” x 22”

181 cm x 100 cm x 56 cm

Bathing Well

44” long

25” wide

21 1/4” interior depth

Shipping Weight

194 lbs. / 88 kg

Tub Weight Filled

854 lbs. / 387 kg

Tub Only Weight

106 lbs. / 40 kg

Gallons to Overflow 86 gal. / 326 L

electRIcal SPecIfIcatIonS:

Pump

1/15 HP; 1.3 AMP; 110V

Heater

1.5 kW; 12.5 AMP; 110V

Requirements

20 AMP; 110V, separate circuit

required protected w/ Class A GFCI

Chromatherapy LED Lighting*

Comfort Pillow - Oval or Rectangle

Bolt-On Grab Bar

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Lift & Turn Waste and Overflow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

Cable Drive Waste and Overflow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color
Matched (Bone, White and Biscuit Only)

Optional Pump Location

Premium Colors

All acrylic colors featured by Aquatic match the industry’s

leading fixture manufacturers.

*This whirlpool will need to be hard wired to the breaker box.

Three outlets will be supplied on the whirlpool.

oPtIonal equIPMent:

aquatic quality features:
- 1.5 kW Inline Maintenance Heater
- Run-Dry Pump with 20-Minute Timer
- 2 Circulation Portal Covers
- Bath-Side On/Off Electronic Button
- ”Quiet Pad”

Anti-Vibration Pump Mount for Quiet Operation

- 2 Arm Rests
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors

ul & IaPMo listed, factory tested

limited lifetime Warranty

StandaRd equIPMent:

fax-on-demand

document #1229

22”

39 1/4”

18 3/4”

20 5/8”

71 3/8”

39 1/4”

Deck Width

3 1/2”

5 1/4”

16 1/4”

2

1

Advertising