The low-pass filter – Nikon D90 User Manual
Page 264
244
n
The Low-Pass Filter
The image sensor that acts as the camera’s picture element is fitted with a low-pass
filter to prevent moiré. If you suspect that dirt or dust on the filter is appearing in
photographs, you can clean the filter using the Clean image sensor option in the
setup menu. The filter can be cleaned at any time using the Clean now option, or
cleaning can be performed automatically when the camera is turned on or off.
❚❚“Clean Now”
1
Place the camera base down.
Image sensor cleaning is most effective when the camera
is placed base down as shown at right.
2
Display the
Clean image sensor menu.
Highlight Clean image sensor in the setup
menu and press
2.
3
Select
Clean now.
Highlight Clean now and press
2.
The message shown at right will be displayed
while cleaning is in progress.
The message shown at right will be displayed
when cleaning is complete.