Nikon D200 - Manual (Page 153)

143
S
etup
C
ustom S
ettings
Custom settings are used to fi ne-tune a variety of camera settings to suit the
user’s pref er enc es, creating combinations of settings that diff er from the factory
defaults in eff ect at the time your cam era was purchased. In addition to Custom
Settings C (Bank Select) and R (Menu Reset), settings in the Custom Settings
menu are divided into the following six groups:
Group Custom Settings
a Autofocus a1–a10
b Metering/Exposure b1–b7
c Timers/AE&AF Lock c1–c5
d Shooting/Display d1–d8
e Bracketing/Flash e1–e8
f Controls f1–f7
Press the multi selector up or down to highlight the desired group and then
press the multi selector to the right. The full list of Custom Settings a1–f7 will be
displayed, starting with the settings in the selected group. To select a setting in
a diff erent group, press the multi selector up or down scroll until the desired set-
ting is displayed, or press the multi selector to the left to return the top menu and
select a diff erent group. Custom Setting a1 (AF-C Mode Priority) and f7 (No
Memory Card?) are linked: pressing the multi selector up when Custom Setting
a1 is highlighted displays Custom Setting f7, while pressing the multi selector
down while Custom Setting f7 is highlighted displays Custom Setting a1.
Custom Settings
The multi selector can be used at any time when the monitor is on. The focus selector
lock switch only takes eff ect when the monitor is off .
Using the Multi Selector