Nikon S70 User Manual
Page 184
172
Troubleshooting
Tech
nic
a
l No
tes
Nikon Transfer does not start
when camera is connected.
• Battery is exhausted.
• USB cable is not correctly connected.
• Confirm the compatible operating systems.
• Camera is not recognized by the computer.
• Computer is not set to start Nikon Transfer
automatically. For more information on Nikon
Transfer, refer to help information contained
in Nikon Transfer.
The PictBridge startup screen is
not displayed when the
camera is connected to a
printer.
With some PictBridge-compatible printers, the
PictBridge startup screen may not be displayed
and it may be impossible to print pictures when
Auto is selected for the Charge by computer
option in the setup menu. Set the Charge by
computer option to Off and reconnect the
camera to the printer.
Pictures to be printed are not
displayed.
Memory card contains no pictures. Replace the
memory card. Remove the memory card to print
pictures from the internal memory.
Cannot select paper size with
camera.
Paper size cannot be selected from the camera
in the following situations, even when printing
from a PictBridge-compatible printer:
• The printer does not support the paper sizes
specified by the camera.
• The printer automatically selects the paper
size.
Edge of printed picture is
cropped.
• When printing pictures taken at an A Image
mode setting of
f 16:9 (3968) (default
setting), the edges of pictures may be
cropped, preventing printing of complete
pictures. Refer to the documentation supplied
with the printer or consult the digital photo
lab for further details to make sure that the
printer supports printing at an aspect ratio of
16:9.
• Take pictures at the A Image mode setting
other than
f 16:9 (3968).
Problem
Cause/Solution
A