Nikon D7000 - Manual (Page 233)

213
U
Use this option to fine-tune the exposure value selected by the
camera. Exposure can be fine tuned separately for each
metering method by from +1 to –1 EV in steps of
1 /
6
EV.
At the default setting of Off, exposure only locks when the AE-L/
AF-L
button is pressed. If On is selected, exposure will also lock
when the shutter-release button is pressed halfway.
b4: Center-Weighted Area
G button
➜ A Custom Settings menu
When calculating exposure, center-weighted metering assigns the
greatest weight to a circle in the center of the frame. The diameter (
φ)
of this circle can be set to 6, 8, 10, or 13 mm or to the average of the
entire frame.
Note that the diameter is fixed at 8 mm when a non-CPU lens is used.
Option
M φ 6 mm
L φ 8 mm
N φ 10 mm
O φ 13 mm
P Average
b5: Fine Tune Optimal Exposure G button
➜ A Custom Settings menu
D
Fine-Tuning Exposure
Exposure fine tuning is not affected by two-button resets. Note that as the exposure
compensation (
E) icon is not displayed, the only way to determine how much exposure has
been altered is to view the amount in the fine-tuning menu. Exposure compensation
(
0 107) is preferred in most situations.
c: Timers/AE Lock
c1: Shutter-Release Button AE-L G button
➜ A Custom Settings menu