Nikon D4S - Manual (Page 48)

38
St
ep 3: T
h
e C
o
nnec
tion W
izar
d
3
Start the connection wizard.
Highlight Connection wizard and press
2 to start the connection wizard.
4
Choose a connection type.
Highlight FTP upload and press J.
5
Name the new network profile.
Enter the name that will appear in the
profile list and press
J (011; to use the
default name, press J without making
any changes). Profile names can be up to
16 characters long.
6
Obtain or select an IP address.
Highlight one of the following options
and press
J.
• Obtain automatically: Select this option if
the network is configured to supply the
IP address automatically. Press
J to
proceed to Step 7.
• Enter manually: When prompted, enter an IP address and
subnet mask by pressing 4 and 2 to highlight segments
and 1 and 3 to change. Press J to exit when entry is
complete, then press J again to proceed to Step 7.