Nikon AF-S DX NIKKOR 18-300mm f-3.5-5.6G ED VR - Manual (Page 19)

19
Jp
En
De
Fr
Es
Sv
Ru
Nl
Pt
Pb
It
Cz
Sk
Ro
Ua
Ck
Ch
Kr
Id
Using Vibration Reduction: Notes
• When using vibration reduction, press the shutter-release button
halfway and wait for the image in the viewfinder to stabilize before
pressing the shutter-release button the rest of the way down.
• When vibration reduction is active, the image in the viewfinder may
be blurred after the shutter is released. This does not indicate a
malfunction.
• Slide the vibration reduction mode switch to NORMAL for panning
shots. When the camera is panned, vibration reduction applies only
to motion that is not part of the pan (if the camera is panned
horizontally, for example, vibration reduction will be applied only to
vertical shake), making it much easier to pan the camera smoothly in
a wide arc.
• Do not turn the camera off or remove the lens while vibration
reduction is in effect. If power to the lens is cut while vibration
reduction is on, the lens may rattle when shaken. This is not a
malfunction, and can be corrected by reattaching the lens and
turning the camera on.
• If the camera is equipped with a built-in flash, vibration reduction
will be disabled while the flash charges.
• If the camera is equipped with an AF-ON button, pressing the
AF-ON button will not activate vibration reduction.
• Turn vibration reduction off when the camera is securely mounted
on a tripod, but leave it on if the tripod head is not secured or when
using a monopod.