Release mode, Choosing a release mode – Nikon D800 User Manual

Page 127

Advertising
background image

En_03

k

103

k

Release Mode

To choose a release mode, press the release
mode dial lock release and turn the release
mode dial to the desired setting.

Choosing a Release Mode

Mode

Description

S

Single frame

Camera takes one photograph each time shutter-release
button is pressed.

C

L

Continuous

low speed

While shutter-release button is held down, camera takes
photographs at frame rate selected for Custom Setting d2
(CL mode shooting speed,

0 293). Lower built-in flash

(

0 182); continuous release is not available while flash is

raised.

C

H

Continuous

high speed

While shutter-release button is held down, camera records
photographs at frame rate given on page 104. Use for
moving subjects. Lower built-in flash (

0 182); continuous

release is not available while flash is raised.

J

Quiet

shutter-

release

As for single frame except that noise is reduced by
disabling beeps and minimizing sound produced when
mirror drops back into place. Beep does not sound when
camera focuses regardless of setting selected for Custom
Setting d1 (Beep;

0 292) and mirror does not drop back

into place until shutter-release button is returned to
halfway position after shooting, allowing you to delay
noise made by mirror. Mirror is quieter than in single-frame
mode.

E

Self-timer

Use self-timer for self-portraits or to reduce blurring caused
by camera shake (

0 106).

Advertising
This manual is related to the following products: