AT&T DECT 6.0 EL52201 - Manual (Page 29)

24
Telephone operation
Intercom
make and answer an intercom call
Use the intercom feature for conversations between handsets.
Press INT on your handset when not in use.
If you have two handsets, your originating handset
screen shows
CALLING OTHEr HANDsET. The other
handset rings and its screen shows OTHEr HANDsET
Is CALLING.
If you have more than two handsets, your originating
handset screen shows
INTErCOm TO: Use the dialing
key to select the destination handset. The originating
handset screen shows
CALLING HANDsET x (x
represents the handset number). The destination
handset rings and its screen shows
HANDsET x
Is CALLING.
To answer the intercom call, press any dialing key ( 0-9,
or #), pHONE/
FLAsH
, /spEAKEr or INT on the other
handset. Both handset screens now show INTErCOm.
To end an intercom call, press OFF/
CANCEL
or place
the handset back in the telephone base or charger. Both handset screens
now show
INTErCOm ENDED.
notes:
Before the intercom call is answered, you can cancel it by pressing OFF /CANCEL or INT
on your originating handset.
If the other handset is not answered within 100 seconds, is in use, on a call or is out of
range, your originating handset shows
uNABLE TO CALL. Try AGAIN .
Pressing OFF/ CANCEL or muTE/ DELETE temporarily silences the intercom ringer.
If you have four handsets, of which two handsets are on an intercom call, the other two
handsets can be used on an outside call (see
Join a call in progress on page 22) or a
separate intercom call.
Answer an incoming call during an intercom call
If you receive an incoming outside call during an intercom call, there is an
alert tone.
To answer the incoming outside call:
Press pHONE/
FLAsH
. The intercom call ends automatically.
To end the intercom call without answering the incoming outside call:
Press OFF/
CANCEL
. The intercom call ends and the handsets ring for
the incoming call.
To let the answering system answer the incoming outside call:
Do nothing. Continue with the intercom call. If the answering system is on,
it answers the incoming call after the number of rings you have set.
1.
•
•
2.
3.
•
•
•
•
•
•
•
INTERCOM TO:
CALLING
HANDSET X
INTERCOM