Answer on/off, Answering system settings – AT&T DECT 6.0 EL52201 User Manual

Page 45

Advertising
background image

40

Answering system

Answering system settings

To delete your announcement:

Follow Steps 1-4 in

To play the current announcement

on page

39 to play the announcement.

Press

3 during playback to delete your recorded

announcement. The system announces,
Announcement deleted.”

If your announcement is deleted, calls are answered with the default
announcement, “Hello. Please leave a message after the tone.”

Answer on/off
Unless you change it, the answering system is on and ready to record
messages. If the answering system is on, the

ANs ON icon displays on the

handset screen and the

/ANs. ON/OFF light on the telephone base is

on. You can turn the answering system off, but if you do so, the answering
system does not answer calls and record incoming messages.
using the handset:

Press

mENu/

sELECT

in idle mode to enter the main menu.

Press

CID

or

DIr

to scroll to >ANsWErING sys, then press

mENu

/sELECT.

Press

CID

or

DIr

to scroll to >ANsWEr ON/OFF, then

press

mENu

/sELECT.

Press

CID

or

DIr

to select between >ON and

>OFF, then press

mENu

/sELECT to save the setting. A

confirmation tone sounds.

using the telephone base:

Press

/ANs. ON/OFF to turn the answering

system on or off. If the answering system is turned
on, it announces, “Calls will be answered.” If the
answering system is turned off, it announces, “Calls
will not be answered
.”

notes:

If the answering system is off and there is an incoming call, the system answers after 10 rings
and announces to the caller, “Please enter your remote access code.” For more information
about remote access, see

remote access code on page 42.

You can turn the answering system on or off from either the handset or the telephone base,
but you can only use the handset to change the other answering system settings.
You cannot turn the answering system on or off while a handset is on a call or the telephone
base is playing messages.
During an incoming call, press

/ANs. ON/OFF to turn the answering system on or off.

1.

2.

1.
2.

3.

4.

2-PLAY 3-DELETE
5-STOP 7-RECORD

ANSWER ON/OFF
>ON

Advertising
This manual is related to the following products: