Installing blank cards into the card hopper – HID DTC1000/4000 User Guide User Manual
Page 22
Advertising
© 2012 HID Global Corporation
All rights reserved
DTC1000/DTC1000M/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.5)
22
Installing Blank Cards into the Card Hopper
Step
Procedure
3
Press the Card Hopper Load Lever down until the Card Tray locks into place.
4
a. Load up to 100 cards into the Hopper with the print side down.
b. If using cards with a magnetic stripe, the magnetic stripe should be loaded
with the stripe up and to the front of the Printer.
5
Close the Card Hopper Cover to release the lever to the printing position.
Advertising