HID DTC1000/4000 User Guide - Manual (Page 27)

© 2012 HID Global Corporation All rights reserved
DTC1000/DTC1000M/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.5)
27
Connecting the Printer power
Follow this procedure. (Note: Do not connect the Printer‟s USB cable until prompted during the Printer
Driver installation.)
Step Procedure
1 Plug the AC adapter power cable into the back of the Printer
2 Plug the wall power cable into the AC power adapter.
3 Plug the wall power cable into a standard 100-240VAC power outlet.
4 Press the Pri nter‟s Power Button to power on the printer.
NOTE: The printer will power down during the „sleep time‟ but will automatically
power up when a print job is sent.